The Information Centre IC 995 Three Phase Meter

The IC 995 is the latest in the developing range of IC 900 Series Information Centres. In addition to the standard measured features of its predecessors (IC 970), the IC 995 breaks new ground in displaying Harmonics to 31st Inst.

 It's large graphic display enables tabulated, bar and line graphs of Harmonic content, making the IC 995 a true engineering network analyser.

 Built-in Modbus Communication, Voltfree pulsed output and programmable digital inputs and outputs ensure simple, accurate, remote monitoring of data, particularly when used in conjunction with the Autometers Horizon Monitoring System.

User-friendly installation, programming and operation make the IC 995 the choice of installers, operators and engineers alike. This, combined with Protocol compatibility across the Autometers Range, ensures that network communication remains one of the key strengths of the Information Centre Range.

Additional Features

• Displaying: Volts, Amps, Power Factor, kWh, kVAh, kVARh, Inst kW kVa, kVar, Hz, Max Demand kW kVa, kVar, ACT Demand kW kVa, kVar, Minimum Amps, Volts, Maximum Amps, Volts, Thd Amps, Thd Volts, Harmonics to the 31st Inst. Amps, Harmonics to the 31st Inst. Volts.
• Overcurrent Alarm
• Available with RS485 MODBUS
• Pulse Output (volt Free)
• Small and compact in size (96x96mm)
• Extremely reliable
• Fast and easy installation procedure
• Smaller dimensions for overall cost reduction of the meter site
• Multi-phasing connection (all in one: single and poly-phase meter)
• Compatible with Autometers metal enclosures

Technical Information

• Input Network 1ph2w, 3P3W, 3P4W
• Input Frequency 45~65Hz
• Input voltage Normal: AC 100V, 400V, Overloading: 600V (continuous): 1000V / 30s
• Consumption: <0.2VA#Input current
• Overloading: 6A (continuous); 50/A 1s
• Consumption: <0.2VA                                                                               
• Pule output Mode: Octocoupler pule output, volt free
• Communications RS485 (Modbus-RTU)
• Digital input (DI) 4 drying contact inputs, with +5V power
• Digital output (DO) Mode: 2 NO contacts (AC 250V/3A, DC 30V/3A)
• Accuracy Frequency 0.01Hz, reactive energy 1 class, others 0.5 class
• Display LCD with backlight
• Power supply AC/DC 85~270V; consummation < 4VA
• Power / current input / voltage input AC2kV/1min;
• Power / digital inputs / RS485 AC1.5kV/1min;
• Inputs / outputs / housing > 5M_
• Working Temperature -10c ~ +45c
• Storing Temperature -20c ~ +70c
• Relative Humidity 5% ~ 95% Non-Condensing
• Material used Polycarbonate v.0 rated
• Pulse duration Default: 100ms
• Pulse value Default: 10kwh/imp
• Relay contacts maximum switching voltage 230 volt 100 Ma
• Maximum switching current 0.75 amp (switching power 30 va)
• Communication Output RS 485 Modbus
• Baud rate 9600
• Wiremode 2 wire
• Modbus Type RTU
• Parity Type Even
• Data Format Floating Point
• FP. Format High Word 1st